Handheld Programmer
BIS M-87_
28
Operation
5
Loading files
5.7 Connecting the
Handheld
Programmer to a
PC/laptop
Data
transmission
Charge life
►
Switch to the
“File Browser”
tab.
►
Tap on
[Open]
.
⇒
The
“Open”
dialog opens.
►
Select file and confirm with
[OK]
.
⇒
The saved data are read and
displayed on the
“RW Data”
tab.
Fig. 31: Saving files
The Handheld Programmer can optionally be connected to a PC/laptop using Bluetooth, WLAN,
or USB (docking station).
Files can be sent between the Handheld Programmer and PC/laptop using the
“Windows
Mobile Device Center”
software.
Note
Depending on the installed option, refer to the WORKABOUT PRO operating manual
for the exact procedure for connecting the Handheld Programmer to the PC. Opera-
tion of the
“Windows Mobile Device Center”
software is described in its online
help.
►
Connect Handheld Programmer to PC.
►
“Windows Mobile Device Center” (PC) responds and automatically opens a connection to the
WORKABOUT.
or
►
In Windows Explorer (PC) search for “WORKABOUT PRO”..
►
From Explorer you can exchange files between the PC and WORKABOUT PRO.
Note
A high-capacity rechargeable battery has a battery life of up to 48 hours after a full
charge under normal operating conditions. Prerequisite: 200 read/write operations,
after 3 min. without being used, the device enters Suspend Mode. Data in the
Handheld Programmer are retained for at least 10 to 15 minutes while the battery is
being replaced.
