Handheld Programmer
BIS M-87_
24
Writing to data
carriers, cont.
►
Switch to the
“RW Data”
tab
►
Start Balluff RFID Reader.
►
Make desired settings.
►
Activate read/write head by
tapping
[Open reader]
.
⇒
The settings are grayed
out and the button
changes to
[Close
reader]
.
Fig. 24: Writing to data carriers
►
Select start address, number of bytes to write, and data format.
►
Select the data record you want to write.
►
Tap on
[Write]
.
⇒
The
“Operate”
field begins to flash yellow.
►
Hold the active surface to the data carrier you wish to write to.
⇒
The data are written; if successful, the
“Operate”
field lights up green.
⇒
If there is a write error, the
“Operate”
field lights up red.
Fig. 25: Write operation successful
Fig. 26: Write error
Operation
5
