www.balluff.com
Handheld Programmer
BIS M-87_
13
Getting Started
3
“Settings” tab
(continued)
The following settings can be made:
Code Tag Type
Selecting the tag type is possible only with BIS M-87_-1-008-00_ Handhelds. All or one particu-
lar data carrier type may be selected:
All
Processes
all Balluff-supported
data carrier types (default setting).
Mifare
All
Balluff supported
Mifare data carriers are processed.
ISO15693
All
Balluff supported
ISO 15693 data carriers are processed.
Note
BIS M-87_-1-008-00_ : All, Mifare & ISO15693 data carriers
BIS M-87_-1-010-00_ : ISO15693 data carriers
Use CRC Check
Uses the CRC checksum. If the CRC data check is activated, the validity of the data is ensured
using a CRC checksum (
see also “Data security” in Section 4 “BasicKnowledge”, starting on
page 17
).
If the CRC data check is not activated, the validity of the data is checked using a double read.
Sounds
Setting an audio signal for a read error (“on Error”) or successful reading (“on Success”).
UID Format
Setting the display format of the serial number.
The serial number can be displayed in “Hex” (hexadecimal), “Dec” (decimal) or “ASCII” (ASCII-
Format) format.
Continuous Read
Continuous reading.
If this option is enabled, read requests are carried out automatically at the set interval.
[Open Reader]
Activating the read/write head.
The read/write head is activated with the settings made and the options are grayed out. The
label on the button changes to
“Close Reader”
.
Go to the
“RW Data”
tab to perform read or write operations.
[Close Reader]
Deactivate the read/write head. The settings are enabled for editing.