Balluff BDG D 60-H020-NUS01-1318-0000-S4L4 Series, User Manual, Page: 29 / 94

www.balluff.com 9 english
4.2 Display elements
The display unit is a two-line backlit LC display with two
circle segments and a status LED.
Fig. 4-2:
LC display Numerical
display (only
BDG DA160-...)
Status LED
Display elements
4.2.1 Status LED
Signal Meaning
Green, static The device is ready.
Green, alternating
with LED off in a
ratio of 10:1, 1 s
period
IO-Link communication is active.
The device is ready.
Yellow, flashing
(3 Hz)
Out of Range, state changes
automatically upon returning to
measuring range
Red, static General error or in teach mode
Red, flashing (1 Hz) Measurement error / measured
value corrupt, factory reset
required (the set parameters can
be saved beforehand with an
IO-Link master)
Blue, static Maintenance must be performed.
Tab. 4-1: LED
For further signals, see document on IO-Link
configuration under www.balluff.com on the
product page.
4.2.2 LC display
The numerical display is only included in the
BDG DA160-... variant.
The LC display has two lines in which the actual value,
setpoint or differential value can be displayed depending
on the configuration. In the standard configuration, the
actual value is displayed in line 1 and the setpoint in line 2.
The display content is updated every 50 ms.
If the actual value corresponds to the setpoint or is within a
defined tolerance range, this is signaled by the green
match indicators lighting up.
Line 1
Line 2
Match indicator
Match indicator
Orientation indicator
Deviation indicator
Directional indicator
Orientation indicator
Error occurred
Position value
outside the display
range
Fig. 4-3: LC display
4
Product description (continued)
BDG D_ _60-H020-NUS01-1318-0000-S4L4
Digital position indicator