Ballu KFR-3502BPE Service Manual Download Page 39

Page: 39 / 46

Screw

Handle

Valve Cover

Front Panel

Back Panel

Top Cover

1. Remove the top panel

1) Take out the screws of the top panel.

2) Remove the top panel.

2. Remove the front panel

1) Take out the screws of the front panel.

2) Take out the screws of the strengthen plate and remove the

strengthen plate.

3) Take out the screws of the electrical control box.

4) Remove the front panel.

3. Remove the electrical control box

1) Take out the screws of the valve cover and remove the

valve cover.

2) Take out the screws of the handle and remove the handle.

3) Disconnect the electrical control box and the other parts.

4) Take out the screws of the electrical control box.

5) Remove the electrical control box.

KFR-3502W/BPE,KFR-3601W/BPE,KFR-4001W/BPE

OPERATION PROCEDURE

PHOTOS

Screw

Strengthen Plate

Screw

11. DISASSEMBLY INSTRUCTIONS

Summary of Contents for KFR-3502BPE















































Search results

Summary of Contents for KFR-3502BPE

Reviews:

Related manuals for KFR-3502BPE

Brands by name

Popular brands

Ballu KFR-3502BPE, Service Manual

Search results

Summary of Contents for KFR-3502BPE

Reviews:

Related manuals for KFR-3502BPE

Brands by name

Popular brands