Ballu BOGH-15, Operation Manual

Page: 20 / 24

20
Glitch The reason The decision
No flame
The shortage of gas supply (bad Gazi
classification of liquefied gas or dirt in the
system)/pressure regulator setting Len
wrong or defective
Adjust or replace empty cylinder/replace
gas
A sudden gust of wind (above 3 m/s) in
the absence of gas panels
Remove heater from direct gusts of wind
Faulty thermocouple sensor'S SLM Replace
Defective solenoid valve Replace
Broken fuse or slope of the floor more
than 15 degrees
Replace the fuse or move-a on a surface
with a slope of less than 15 degrees
The obstruction in the gas system Check out and gently
Gas leak Check and fix leak
Isolation of electrodes or cable defect
pezopodzhiga
Replace
"airbag" gas cylinder
Turn the gas cylinder to the gas from-
covered area away from ignition sources
within 10-15 seconds
Soot in a glass flask
Poor quality gas or gas of non-suitable
for winter
Use high-quality gas, one-person chtitelno
pure propane
Poor ventilation
Remove the side covers, ventilate the
device, mount the side covers
Mixing chamber of gas mixture for-
grjaznena or damaged
Clean/replace
The burner is dirty/damaged Clean/replace
Breakage of the glass
flask
Thermal shock due to weather conditions Replace flask
Unsuitable cleaning tools Replace flask
Accidental drop of the heater Replace flask
Does not light the wick
Clogged nozzles Wick You must purge the injectors Wick
Defective electronic control unit Replace
The appliance does not
respond to commands
from the remote control
Defective remote control
Replace the batteries or replace remote
control
Defective remote receiver Replace
10. Troubleshooting.
Replacing / cleaning flasks:
If the flask is replaced or if it is necessary to clean
it, disassemble the instrument in the reverse order
(see the “Preparation” section), remove the flask (use
personal protective equipment when disassembling)
and clean it.