888.496.5137
b
all
h
og
g
oals.com
PAGE 17
STEP 12 -HEIGHT INDICATOR ATTACHMENT
•
Measuring from the top of the rim to the top of the playing surface, adjust the height of the rim to lowest corresponding height
listed on the height sticker.
•
Make a reference mark on the inner portion of the jack at the bottom of the outer sleeve.
•
Adjust the backboard to its lowest point and apply the (#2) height decal to the inner portion of the jack lining the reference mark
up with the corresponding height on the decal as shown in Image 13.
Note:
You may apply the (#2) height decal to the side or the rear of the jack. When applying to the rear of the jack, a portion of the
height decal may need to be trimmed off. While this is a rare occurrence, it is possible depending on the height of your anchor system
in relationship to the slope of the driveway where the rim height measurement was taken.
Image 13
TOP OF JACK
BOTTOM OF JACK
2
1
7' 6"
8' 6"
9'
9' 6"
10'
