888.496.5137
b
all
h
og
g
oals.com
PAGE 10
STEP 5 - POLE ASSEMBLY - LOWER JACK ATTACHMENT
•
Locate and unwrap the jack leaving the plastic zip tie intact.
•
Attach the (#22) handle to the (#6) jack with (#23) retainer clip. Turn the handle 10-12 revolutions partially extending the jack.
•
Attach the (#6) jack to the (#5) jack ears using one (#16) bolt, one (#9) stainless washer, one (#25) gray nylon tube, and 2 (#8) ABS
washers per side of the jack as shown in Image 7.
Experienced Installer Tip:
When attaching the jack to the jack ears it helps to first insert the (#25) gray nylon tube into the (#5) jack
ear centering it on the ear. Apply a small amount of spray adhesive to the smooth side of the (#8) ABS washers and slide them over the
(#25) gray nylon tube adhering them to the (#5) jack ears. This will prevent the (#8) ABS washers from getting jostled off of the (#25)
gray nylon tubes during assembly.
•
Rest the top of the (#6) jack on the pole protecting the painted surface with a small piece of packing foam or cardboard. You may
fully tighten the (#16) bolts at this time.
Image 7
DETAIL #2
LOWER JACK
16
9
25
8
5
23
6
8
5
8
25
9
16
22
8
