6
Adjusting your Shade’s “MY” Position (OPTIONAL)
Using UP or
DOWN, put your
shade in motion.
When it reaches
your desired “MY”
Position, press and
release “MY”
to stop the shade.
To set your ‘MY’
Position, press and
hold “MY” until the
shade jogs. A jog
is a brief up and
down movement
of the shade. Your
“MY” Position is
now set.
1
2
On the DecoFlex WireFree™ RTS
Wall Switch, the STOP button
functions and programs the same
as the “MY” button.
so
mfy
The Copy & Paste Sequence
The basic sequence of copy and paste allows you to add new remotes to your shade
and to create groups of shades that will operate together.
In this sequence, you may copy and paste from one control to another control or
from one channel on a control to any other channel either on the same control or
on a new control.
so
mfy
A channel is used to operate motorized shades with
controls. A channel is either associated with a single
motorized shade covering or group of motorized shades.
Adding Additional Controls
Your control has been programmed by Springs Window Fashions to control
your shade. The “MY” position has been set and you may choose to adjust this
setting. When adjusting the “MY” position on your product sharing a channel,
it is important to adjust each individually. Disconnect the power to all products
that share a channel to avoid unwanted programming. After adjustments are
made, reconnect power to begin operation.
Sheer Shades
- the default home position is preset to shade lowered and vanes closed.
Layered Shades
- the default home position is preset to shade lowered and vanes open.
To change or adjust the home position, use the UP or DOWN button to reach the
desired position and then press and hold the “MY” until the shade jogs.
