background image

5

Adjusting your Shade’s Default Lower Limit (OPTIONAL)

If you would like to adjust your shade’s default lower limit

*PRODUCT SAFETY NOTE:

•  For Cellular, Pleated, Classic Roman, Soft Roman and Woven Wood, Solar and Roller Shades 

Extending the shade beyond the ordered limits can cause shade damage. 

•  For Sheer and Layered Shades

 - changing the lower limits will change the “MY” position for the 

shade. See following page to adjust “MY” position.

•  If your shade will not lower to your desired lower limit, contact a customer service agent for assistance.

Briefly press 

DOWN and 

release. Allow the 

shade to reach its 

default lower limit.

1

Adjust your lower limit by 

using UP or DOWN to 

move your shade to your 

new desired lower limit

*

The shade will only move 

while UP or DOWN is 

being pressed while in 

this adjustment mode.

3

Once the shade 

stops, press and 

hold UP and DOWN 

simultaneously until 

the shade jogs. A 

jog is a brief up and 

down movement of 

the shade.

2

When the shade is stopped 

at your new desired lower 

limit, press and hold “MY” 

until the shade jogs. 

You have now reset the 

lower limit.

4

Adjusting your Shade’s Default Upper Limit  (OPTIONAL)

If you would like to adjust your shade’s default upper limit 

Adjust your upper limit by using 

UP or DOWN to move your shade 

to your new desired upper limit.

*

 

The shade will only move while UP 

or DOWN is being pressed while 

in this adjustment mode.

3

Briefly press UP 

and release. Allow 

the shade to 

reach its default 

upper limit.

1

Once the shade stops, 

press and hold UP and 

DOWN simultaneously 

until the shade jogs. A 

jog is a brief up and down 

movement of the shade. 

2

When the shade is stopped 

at your new desired upper 

limit, press and hold “MY” 

until the shade jogs. You 

have now reset 

the upper limit.

4

*PRODUCT SAFETY NOTE: 

•  For Cellular, Pleated, Classic Roman, Soft Roman and Woven Wood

 

- Adjusting the motor too 

tight can cause the motor to fail and/or break/fray the internal cording.

•  For Solar and Roller Shades

 - Be sure the hembar does not lift into the Fascia or Cassette, 

this could cause the hembar to get stuck and/or damage the fabric. 

•  For Sheer and Layered Shades

 - 

Make sure the bottom rail does not lift into the cassette.

•  If your shade will not raise to your desired upper limit, contact a customer service agent for assistance.

!

Shade Adjustments

!

Summary of Contents for RTS Motorized Shades













Reviews: