Care2
Installation Instructions
Care2 issue 7
75
6.5 A
NSWER
A
D
ISABLED
T
OILET
A
LARM
When an Incoming Call is made from a Disabled Toilet Alarm the
Console will Ring and the “Incoming Call” LED & the LCD
Backlight Display will flash.
The LCD Display will indicate the Outstation making the call.
Figure 6.9 — LCD Display showing a Disabled Toilet Alarm Incoming Call
Open the Handset Door and press the Encoder to Accept the call.
Figure 6.10 — LCD Display showing the DTA Call has been Accepted
At the Disabled Toilet, the Alarm will now change from a
Continuous Tone to an Intermittent Tone to indicate it has been
acknowledged at the Console.
By default an Accepted Call can only be reset by pressing the
“Reset” button on the Local Reset Point within the Disabled
Toilet.
However, it is also possible to reset Accepted DTA Calls at the
Console using a “Long Encoder Press” if “DTA Resetable” is set to
Active in the System Parameters menu.
Refer to Section 4.9.1 on page 55 for details.
N
OTE
: It is not necessary to pick up the handset as it is not possible to
talk to the Occupant.
