![background image](http://html1.mh-extra.com/html/baldor/ohv-series-3kw-9kw/ohv-series-3kw-9kw_operators-manual_3583711019.webp)
E. Restart the unit and check for voltage output.
BE EXTREMELY CAREFUL WHEN USING THE ALTERNATE METHOD FOR
FLASHING THE GENERATOR AS YOU WILL BE WORKING AROUND FAST,
ROTATING COMPONENTS ALONG WITH LIVE WIRES AND BARE CONNECTIONS.
LOW VOLTAGE OUTPUT
Possible Problems:
1.
Generator speed too slow
. If the generator is turning too slow, the generator set will
produce low or no output voltage. Make sure the generator is turning at the speed specified
on the nameplate.
2.
Broken wires or loose connections.
Broken wires or loose connections can cause the
generator set to have low or no output voltage. Check all wiring for broken wires and
bad/loose connections.
HIGH VOLTAGE OUTPUT
Possible Problems:
1.
Generator speed too fast.
If the generator is turning too fast the generator set will produce
high output voltage. Make sure the generator is turning at the speed specified on the
nameplate.
- 12 -
Summary of Contents for OHV Series 3KW-9KW
