
www.supportme.net
Basic Installation 3-3
MN1924
3.1.3 Other requirements for installation
H
The NextMove ESB re24V power supply capable of supplying 2A continuously.
If digital outputs are to be used, a supply will be required to drive them - see section 4.3.2.
H
A PC that fulfills the following specification:
Minimum specification
Recommended specification
Processor
Intel Pentium 133MHz
Intel Pentium
II
400MHz or faster
RAM
32MB
128MB
Hard disk space
40MB
60MB
CD-ROM
A CD-ROM drive
Serial port
USB port
or
RS232 or RS485 serial port (depending on NextMove ESB model)
Screen
800 x 600, 256 colors
1024 x 768, 16-bit color
Mouse
A mouse or similar pointing device
Operating
system
Windows 95, Windows NT
Windows 98*, Windows ME*,
Windows NT*, Windows 2000 or
Windows XP
* For USB support, Windows 2000 or Windows XP is required. Software installation will be
described later, in section 5.
H
A serial cable (connected as shown in section 4.4.4) or USB cable.
H
Your PC operating system user manual might be useful if you are not familiar with Windows.
Summary of Contents for Nextmove ESB
