18
2.
QUICK START
IMPORTANT – You must read these simplified operating instructions before you proceed.
These instructions are to be used as a reference only and are not intended
to replace the detailed instructions provided herein. You must read the
Safety Warnings and Cautions before proceeding.
Note:
A Plug-In Horsepower Resistor
®
, an AC Line Fuse, and an Armature Fuse (supplied separately),
must be installed in order for this control to operate. See Section 4.
Figure 2-1
Plug-In
Fuse
Horsepower Resistor®
Note:
See Table 4-1 for Barrier Terminal Block wire size and recommended tightening torque
specifications. See Table 4-4 for Field connections (Shunt Wound Motors only).
