Baldan MOVERE, Instruction Manual

Page: 57 / 86

After adjusting the working depth, adjust the pressure of the tillage rollers (1). There are
two adjustment options for the tillage rollers: HIGHER PRESSURE and LESSER PRESSURE.
ƒ
Adjustments
• Pressure regulator of the tillage roller - Part I
1 - Dig the discs into the ground to the specified depth.
2 - Then increase the pressure of the tillage rollers (1) by tightening the nuts and cotter
nuts (2) of the rods (3).
3 - If you still need to increase the pressure, loosen the cotter pin (4), flat washer (5),
remove the pin (6) and change the spring (7) of the point "A" to point "B" and attach it
again.
HIGHER PRESSURE:
3
1
2
NOTE
Make them same adjustment on all
tillage rollers (1).
6
7 4
5
“A”
“B”
Instruction Manual
MOVERE
57