14
Tank-Hose Screen
On the Tank-Hose screen, a number must be entered corresponding to the tank and hose.
The relationship between tank and RF Meter is 1:n (one tank is assigned to n meters).
There is a relationship between tank and fluid type. The RF Meter is assigned to one fluid
type. Assign the RF Meter to the tank to which it is connected.
Active keys:
Numeric keys, , ,
The next screen to show is Hose ID. This screen identifies which hose is assigned to the
tank and fluid
Active keys:
None
NOTE:
Hose ID is the number used to create dispense orders for a meter by an operator.
Hose Address Already Used
This screen displays if another RF Meter already uses the last three numbers of an RF
Meter. If this screen displays, check the RF Meters in the system to make sure duplicate
RF Meters do not exist. Then check to see if this RF Meter has already been created in the
system.
It displays for 3 seconds. Then it returns to Create Hose screen.
No Action
