Balcrank 3110-012 Operation, Installation, Maintenance And Repair Manual Download

Page: 8 / 45

Central Control Keypad Operation

Default Screens

The first default screen shows the software version number for

informational purposes only.

Default screens alternate between the System Version screen

(above) and the Enter Pin No. screen (below).

Enter Pin No. screen displays for 3 seconds out of every 5 sec-

onds.

There can only be one supervisor account on each keypad.

Enter Pin No. screen is used by the supervisor to access the

management screens; Initialization, Configuration, Meter,

Report, External printer, and Internal printer.

The Personal Identification Number (PIN) is four (4) digits. To access management screens

enter the supervisor PIN number. The default is 0000 at initial power-up.

Management Screens

The management Select screen displays after entering the supervisor PIN number.

Use the Scroll key to select which menu option is wanted.

Then press the Enter key .

Screens in Initialization (INI) can be accessed only when the

Dispense Order list is empty. The supervisor must clear all

transactions through Configure (CNF) before the INI menu can

be accessed.

Multiple Choice Screens

For multiple choice screens the selection is in inverse video, green on black.

Use the Scroll key to select an answer, YES or NO. The selection is in inverse video.

It is validated by pressing the Enter key .

Move the Scroll key to your choice, YES or NO and press Enter .

Summary of Contents for 3110-012














































Search results

Summary of Contents for 3110-012

Reviews:

Related manuals for 3110-012

Brands by name

Popular brands

Balcrank 3110-012, Operation, Installation, Maintenance And Repair Manual

Search results

Summary of Contents for 3110-012

Reviews:

Related manuals for 3110-012

Brands by name

Popular brands