A
CLIM8ZONE
TM
Unit
Install condensation
hose
The CLIM8ZONE
TM
unit (figure 14, A) has a
condensation drain spout as
shown here.
A hose clamp and condensation
hose are supplied for drainage.
1
Install the hose and hose
clamp over the drain spout
as shown here.
Condensation
Drain Spout
Hose Clamp
2
Tighten the hose clamp
with a Philips head screw
driver to secure the hose in place
and create a water tight fit.
As much as 3+ liters of condensation per
hour may flow from the end of the hose.
Make sure the end of the hose has proper
drainage, so water does not collect around
the CLIM8ZONE
TM
unit. Condensation is
normal and is not a water leak.
Condensation Hose
NOTES
TM
INSTALLATION GUIDE
42391 Rev
A
Balboa Water Group | Your Single Source Solution
29
28
Figure 14