background image

Template  56377  10-05-12

14

Manufactured under one or more of these patents.  U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, 

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending.                                            © Copyright 2009 Balboa Water Group.

59293-01_59294-01_59295-01_B   05-10-21

Jumper Definitions

J109

 

GFCI Test/Trip Enable/Disable

 

Note:

   This feature must be enabled in software as well.

J30

 

Do Not Use

 

J31

 

Jumper on 1 pin when heater voltage is 120V

 

Jumper on 2 pins when heater voltage is 240V

  
 

 

 

J24

 

Jumper on center two pins (240V) when heater voltage is 240V.

 

Two Jumpers installed; one on left 2 pins and one on right 2 pins (120V) when heater voltage is 120V. 

 Warning!

 

Setting DIP switches or jumpers incorrectly may cause abnormal system behavior and/or damage to system components.

 

Refer to Switchbank illustration on Wiring Configuration page for correct settings for this system.

 

Contact Balboa if you require additional configuration pages added to this tech sheet.

J109

J31

120V

120V

240V

J24

Summary of Contents for BP100UX


























Reviews: