background image

Template  56377  10-05-12

4

Manufactured under one or more of these patents.  U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, 

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending.                                            © Copyright 2009 Balboa Water Group.

59293-01_59294-01_59295-01_B   05-10-21

System Ouputs:

Pump 1 

240VAC* 

2-Speed 

12A max 

15-minute timer (30-minute timer for P1 Low in non-circ Setupa 2, 4 & 6 only) 

 

 

This is the heater pump in Setups 2 , 4 & 6. 

 

 

Must deliver 20 GPM through heater

 

 

1-Speed in Setups 1, 3 & 5 

 

 

Unused in Setup 7

Pump 2 

240VAC 

1-Speed 

12A max 

15-minute timer 

 

 

Used in Setups 1 & 2 only

Blower 

240VAC 

1-Speed 

4A max 

15-minute timer 

 

 

Used in Setups 3 & 4 only

Circ Pump 

240VAC* 

1-Speed 

 2A max 

Programmable Filtration Polling 

 

 

This is the heater pump in Setups 1, 3, 5 & 7. 

 

 

Must deliver 20 GPM through heater

Ozone 

240VAC* 

 

.5A max 

Slaved to Circ Pump in Circ Setups and to Pump 1 Low in Non-Circ Setups

Spa Light 

10VAC 

On/Off 

 1A max 

240-minute timer. 

A/V (Stereo)  120VAC 

Hot 

 3A max 

Always on

Heater 

5.5kW @ 240VAC (approx 1.4kW @ 120VAC) 

 

4.0kW @ 240VAC (1.0kW @ 120VAC)   

*Pump 1, Circ Pump and Ozone must be the same voltage.
With 120VAC power input (for Setups 5 - 7 only), Pump 1, Circ pump and Ozone must all be 120V.  See wiring diagram for rewiring instructions.

Basic Functions Setup 1 - 7

Summary of Contents for BP100UX


























Reviews: