background image

Template  56377  10-05-12

1

Manufactured under one or more of these patents.  U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, 

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending.                                            © Copyright 2009 Balboa Water Group.

59293-01_59294-01_59295-01_B   05-10-21

BP100UX Tech Sheet

Customer:   

Balboa Water Group

Part Number:

 

59293-01  5.5kW 800 Incoloy  

 

 

59294-01  4.0kW 800 Incoloy 

 

 

59295-01  Remote Heater System -- Heater is sold separately

Custom Box Overlay 

  

Box Overlay Part Number  N/A

UL System Model For  5.5kW: 

BP1-BP100UX-BU

UL System Model For  4.0kW: 

BP1-BP100UX-BS

UL System Model For Remote: 

BP1-BP100UX-B

Software Version ID:   

 

M100_230 V52.0

Software Version:   

 

52.0

File Name:   

 

BP100_52.0_BP100UX.hex

Configuration Signature:   

E68167C4

Eng. Project Number:   

5353

Control Panels (See later pages for more information):
spaTouch™2   

Any version (version 2.0 or later required for bba™2 fully integrated functionality)

Icon spaTouch™ 

Any version (version 3.36 or later required for bba™2 fully integrated functionality)

Menued spaTouch™ 

Any version (version 2.8 or later required for bba™2 integrated functionality)

TP900 

 

Version 3.1 and later (Version 3.13 or later required for bba™)

TP800 

 

Version 3.1 and later (Version 3.13 or later required for bba™; version 4.11 or later required for bba™2 integrated functionality)

TP600 

 

Version 2.7 and later (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)

TP500 

 

Any version

TP400T US   

Version 2.7 and later (TP400T CE may be used) (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)

TP400W US   

Version 2.7 and later (TP400W CE may be used) (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)

TP200T 

 

Any version

TP200W 

 

Any version

Summary of Contents for BP100UX


























Reviews: