July 2021
12
RESET ERROR
0
1
2
WDT Reset Faults (memory
access, invalid instruction)
Power Issues
After a restart cause this event shall
be generated if the restart cause
was not caused by a power loss.
HIBERNATE
n/a
The HIBERNATE state is entered.
RUN MODE
n/a
The RUN state is entered.
DOOR OPEN
n/a
The door transitioned from closed to
opened.
DOOR CLOSE
n/a
The door transitioned from opened
to closed.
DOOR ALARM
n/a
This denotes that the door has been
open longer than the operator
configurable period.
RECOVERY ON
n/a
This event shall be generated when
the Transient Recovery state is
changed to ACTIVE from another
state.
RECOVERY OFF
n/a
The Transient Recovery state
changes from ACTIVE to another
state.
RECOVERY ERR
The Transient Recovery state
transitioned into the ERROR state.
DRYOUT ON
0
1
Indicates the RH Sensor
Heater Status is ON
Indicates the RH Sensor
Heater Status is OFF
This event shall be generated
whenever the RH Dryout Status is ON
and RH Sensor Heater Status
changes states.
DRYOUT OFF
n/a
This event shall be generated when
the RH Dryout Status transitions
from ON to OFF
UV ON
n/a
This indicates that the UV Lamp just
turned on.
UV OFF
n/a
This indicates that the UV Lamp just
turned off.
State/Status Events
Environmental Alarms
