Invivo
2
300
UM-010 R4.0
Page 25 of 48
Invivo
2
300 User Manual
Entering the workstation chamber using the Ezee Sleeves
To enter the workstation via the Ezee Sleeves;
Set the glove port selector switch (Figure 11) to the correct position for the desired hand entry
(Figure 16).
Hold the desired Ezee Sleeve cuff with the opposite hand.
Supporting the Ezee Sleeve cuff, push the desired hand through the cuff of the Ezee Sleeve
Figure 17 shows this procedure;
Figure 17: Entering the cuffs of the Ezee Sleeves
Repeat the procedure for the other hand (if both hands are to enter the workstation
chamber).
Press and hold the vacuum pedal with your foot (item 1 in Figure 13) until the internal gas
volume in the sleeves has been evacuated (the sleeves will now be tight around your arms),
then remove your foot from the vacuum pedal.
Unscrew the glove port cover knob by turning it anti-clockwise (counter-clockwise).
Rotate the glove port bar until it is horizontal.
Whilst holding the glove port cover knob, push the glove port cover and your hand into the
workstation chamber slowly.
Place the glove port cover in the glove port cover holder. Figure 18 shows the glove port cover
holder;
