Invivo
2
300
UM-010 R4.0
Page 17 of 48
Invivo
2
300 User Manual
Control system layout
The control system layout varies by model. Please familiarise yourself with the control system layout
of your Invivo
2
300 workstation.
Control panel
Figure 9 shows the control panel of the Invivo
2
300 workstation;
Figure 9: Invivo2 300 workstation control panel
1.
Power indicator. Illuminates to indicate the workstation is connected to the mains and is
switched on.
2.
Chamber light switch. Press to switch the chamber light on / off.
3.
Gas Alarm switch. Press to switch the gas alarm on/ off.
4.
Humidistat. Controls the level of humidity inside the workstation chamber.
5.
Lock active indicator LED. Flashes to indicate that the interlock purge cycle is in progress.
6.
Interlock purge button. Press to initiate the interlock purge cycle.
7.
Gas demand indicator. Illuminates when there is a low pressure condition inside the
workstation chamber.
8.
N
2
low indicator. Illuminates to indicate that the nitrogen supply has run out.
9.
Temperature controller. See section 3.3.2 for more details.
1
5
6
7
2
3
4
6
8
