Invivo
2
300
UM-010 R4.0
Page 24 of 48
Invivo
2
300 User Manual
Hand access to the main chamber
Direct hand access to the workstation chamber is provided via the glove ports and the Ezee Sleeve
system. The Ezee Sleeves provide direct bare hand (or gloved) access to the workstation chamber.
The glove ports and Ezee Sleeves can be used in 3 ways;
Left hand glove port only, for loading items into the workstation chamber via the Single Plate
Entry System (SPES).
Both glove ports, for working inside the workstation chamber, loading items into the
workstation chamber via the SPES and unloading the interlock.
Right hand glove port only, for unloading the interlock.
For each method of entry, the glove port selector switch (Figure 11) must be set in the correct position.
Figure 16 shows the positioning of the glove port selector knob for each mode of operation;
Figure 16: Glove port selector knob positioning
Ezee Sleeve overview
The Ezee Sleeves consists of a sleeve and a cuff. There are 3 sizes of Ezee Sleeve available; small,
medium and large. See section 7.4.2 for ordering details.
The sleeve attaches to the glove port via 2 O-rings. The cuff is then attached to the sleeve via an O-
ring. Note that the workstation should not be used without the Ezee Sleeves attached.
