Baker Hughes 022-508-909, Operating Manual

Page: 7 / 89

CL 5 1-7
Instrument Options
• A-Scan Upgrade Option
• Data Recorder Upgrade Option
• Velocity Measurement Option
1.4 What’s in this Manual
The CL 5 Operating Manual is divided into ten
chapters. All chapters except 4 and 5 apply to all
instruments. The last two sections of Chapter 4 apply
only to instruments equipped with the A-Scan or
Velocity measurement options. Chapter 5 applies
only to instruments equipped with the Data Recorder
option. Note that any CL 5 can be retrofitted to
incorporate these options. Following is a summary of
Chapters 1 through 10:
Chapter 1—General Introduction
• Supplying Power to the instrument
• Powering on and off the instrument
• Overview of instrument features
• Explanation of the operating manual contents
Chapter 2—Understanding the Keypad, Menu
System, and Displays
• Operations performed by each key
• Navigating the display screens
• Overview of menu functions
• Explanation of display features (base model, data
recorder, and A-Scan equipped instruments)
• Definition of icons
Chapter 3—Setting Up the CL 5
• Install a probe and configure the instrument by
loading a setup file
• Set up the instrument display appearance (for
base model and A-Scan equipped instruments)
and make other configuration settings
General Information
What’s in this Manual