BAK Thermoplastic Welding Technology Ltd
8
MAINTENANCE
•
Clean the welding nozzle with a wire brush (5201330).
•
Check if the mains cable and the plug are not electrically or mechanically damaged.
TRANSPORT – HANDLING – STORING
Transport:
The welding machine is packed appropriately and must be protected from humidity.
Handling:
Check the shipment of completeness and transport damages. In case of transport damage the
defect must be confirmed in written form at the time of delivery by the carrier. The seller
must be informed as well.
Storing:
In case of temporary storage the welding machine has to be kept packed and must be
protected from humidity. In case of damages occurred by improper storage no warranty claim
can be submitted.
WARRANTY AND LIABILITY
Warranty and liability apply from the date of purchase (documented by the invoice/delivery
note) according to the currently valid general terms of business of BAK. BAK refuses any
warranty for devices which are not in their original condition. BAK-devices may never be
converted and/or modified.
BAK reserves the right to deny any responsibility if this is ignored.
No liability can be assumed by BAK for incorrect installation and/or use as well as natural
wear and tear of the device (e.g. heating elements).
SERVICE AND REPAIR
The welding machine should be checked by an authorised service centre approx. every 1000
hours of running time.
Inspections and repairs have to be executed exclusively by BAK authorised service centres.
For repairs send the well packed machine to your nearest BAK service centre.
