manualshive.com logo in svg

Baja motorsports WD250UR, Owner'S Manual

Share
Download
Baja motorsports WD250UR Owner'S Manual Download Page 51

48

Figure 26

Red  +

Black -

Battery bracket

How to Initially Charge the battery:

1.  Connect the red positive (+) cable to the red 

positive (+) pole of the battery.  

(see figure 23)

2.  Connect the black negative (-) cable to the 

black negative (-) pole of the battery. (see 

figure 24)

 

Note: The red positive (+) cable has a larger 

diameter than the black negative (-) cable.

3.  Charging rate: Charge battery @ 0.7 Amps for  

5 ~ 10 hours.
•  After charging is complete, press down 

firmly with both hands to seat the caps. 

(Do not pound or hammer see figure 25) 

The battery is now sealed. 

•  Locate battery compartment on ATV.   

The battery compartment is located 

under the seat. Battery terminals should 

be facing the front (see figure 26).

•  Once battery is firmly seated in battery 

compartment, attach red positive (+) 

cable to positive (+) terminal on battery.   

Then attach black negative (-) cable 

to negative (-) terminal on battery (see 

figure 26).  

•  Secure battery with battery bracket (see 

figure 26).

 

WARNING

NEVER REMOVE THE STRIP OF 

CAPS NOR ADD ANY WATER OR 

ELECTROLYTE.

Figure 25

Figure 24

Figure 23

Summary of Contents for WD250UR



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands