manualshive.com logo in svg

Baja motorsports WD250UR, Owner'S Manual

Share
Download
Baja motorsports WD250UR Owner'S Manual Download Page 17

14

Fuel level

Filler neck

FUEL VALVE

This vehicle has one manually operated fuel valve.  There are 3 positions

           “ON” 

 

           “OFF” 

 

          “RESERVE”

“ON”   position

            In this position, fuel is allowed to flow into the carburetor when the  

            engine is running or being started.   

“OFF” position

            In this position the fuel is shut off from the carburetor.   The fuel valve

            needs to be placed in this position when the ATV is not in use

“RESERVE” position

            If the fuel level in the fuel tank becomes to low for the engine to stay

            running while the fuel valve is in the “ON” position, turn the fuel valve

            to “RESERVE”. This will allow the engine to begin using the reserve

            fuel supply. You will need to re-fuel as soon as possible. Once 

            re-fueled, turn the valve back to the “ON “ Position .

FUEL TANK CAP

To open the fuel tank cap, take the end of the vent tube out from the vehicle 

body; turn the fuel tank cap counterclockwise.  To close the fuel tank cap, 

turn it clockwise and tighten it securely.  Be sure that the vent tube is 

securely connected to the cap as shown. 

Summary of Contents for WD250UR



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands