manualshive.com logo in svg

Baja motorsports WD250UR, Owner'S Manual

Share
Download
Baja motorsports WD250UR Owner'S Manual Download Page 21

18

INSPECTION BEFORE RIDING

 

WARNING

Failing to inspect the ATV before operating could be hazardous. Failing to 

perform proper maintenance could also be hazardous.

Failing to inspect and maintain your ATV could increases the chances of an 

accident or equipment damage

Always inspect your ATV each time before riding, and make sure it is in a safe operating 

condition. Refer to the INSPECTION AND MAINTENANCE section in this manual.

ITEM TO CHECK

CONTENT

Steering

Smoothness; No restriction of movement; No play or 

looseness

Brakes

Proper brake lever free play; enough brake force; Parking 

brake effectiveness

Tires

Proper air pressure; Enough tread depth; No cracks, rips, 

or other damages

Fuel

Enough fuel for the intended trip; Fuel hose connected 

securely; No damage to fuel tank or cap; Fuel tank cap 

closed securely

Engine stop switch

Proper operation of switch

Engine oil

Proper level – Check oil by inspecting Engine Oil Dip 

Stick.  The engine oil should be between the Minimum 

and Maximum lines. 

Throttle

Proper free play of throttle lever; smooth response; quick 

return to idle position

General condition

Bolts and nuts are tight; no rattle from any parts of the 

engine when running,  no visible evidence of Damage

 

WARNING

Operating this ATV with improper tires, or improper tire air pressure could be 

hazardous. 

If you use improper tires or improper air pressure, you may lose control of the ATV.  

This will cause an accident. 

Always use the size and type of tires specified in this user’s manual. Always maintain 

proper tire air pressure as described in the INSPECTION AND MAINTENANCE section. 

Summary of Contents for WD250UR



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands