background image

27

SHIFTING:

This ATV has a 5 speed transmission with a centrifugal automatic clutch. 

To shift vehicle in neutral while driving, 

repeatedly depress the gear shift lever. The green 

indicator light will illuminate when in neutral.

To shift the vehicle through gears 1-5 

1.  Release the throttle lever. 

2.  Shift into first gear by lifting up once on the 

     gear shift lever from neutral.

3.  Open throttle gradually. Once vehicle has reached adequate 

     speed, release throttle and shift into 2nd gear.

4.  Open throttle gradually then repeat procedure for the remaining gears.

     When slowing down or stopping, release the throttle and apply the brakes

     smoothly. As the ATV slows down, shift to a lower gear by depressing the

     gear shift lever.

Gear Shift Lever

DRIVE SELECT LEVER

The drive select lever shifts the ATV in either 

forward or reverse

To shift ATV in either forward or reverse:          

1.  Release throttle

2.  Apply brakes until you come to a complete

     stop.

3.  Shift transmission into first gear. 

4.  Lift up on lock button on drive select lever

     and pull back for reverse making sure lever

     is locked in place. NOTE: When in reverse, the

     reverse indicator light should illuminate on

     the console, if light does not come on, check

     to see if vehicle is in first gear.

5.  Check for people or obstacles behind you.

6.  Open the throttle gradually continuing to

     watch to the rear while backing. 

Lock button

Drive select lever

When slowing down or stopping, release the throttle and apply the brakes 

smoothly .  As the ATV slows down shift to a lower gear by depressing the 

shift lever

Summary of Contents for WD250UR



















































































Reviews: