TradiePack - User Guide v1.3
Installation & User Guide
TP Range
12
Tuning the DC-DC Charger
As you look at the 20A DC-DC charger, there is an LED and 2 rotary switches on the side face of the
battery (N/A on BTLITH-TP110-24 models)
NOTE -
The BTLITH-TP220 has two separate 20A chargers that must be identically configured to ensure
full 40A charging capability.
1.
Green LED which will illuminate when the DC-DC charger is ready to charge.
2.
Rotary Switch 1 nearest the LED is called Voltage Switch.
3.
Rotary Switch 2 furthest from the LED is called the Delay Switch / Ignition Trigger.
Figure 8: DC-DC Charger switches
The DC-DC charger is factory set at setting 0-6 for smart alternators using an ignition trigger. If you
want to use your DC-DC charger in a different mode, then you need to turn the two rotary switches
to the correct position.
NOTE
–
The BTLITH-TP110-24 requires the ignition trigger to operate the integrated charger.
