I-E96-416B
v
Safety Summary
GENERAL
WARNINGS
Equipment Environment
All components, whether in transportation, operation or storage,
must be in a noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with
energized parts is avoided when servicing.
SPECIFIC
CAUTIONS
Remove modules from their module mounting unit slots before
installing or removing a cable assigned to that slot. Failure to do so
could result in damage to the module. (p. 2-5, 4-1)
We strongly recommend that you turn off cabinet power before
doing any termination unit wiring. Failure to do so could result in
equipment damage. Do not apply power until you verify all wire con-
nections. (p. 2-6)
If input or output circuits are a shock hazard after disconnecting sys-
tem power at the power entry panel, then the door of the cabinet
containing these externally powered circuits must be marked with a
warning stating that multiple power sources exist. (p. 2-6, 4-1)
