Bailey C-I-CV42C, Instruction

Page: 198 / 214

WBPEEUI220771A0 PR35 - 1
PR35
Touchscreen Installation
Purpose/Scope
This procedure explains how install the touchscreen.
Parts
Tools
•
Scissors.
Procedure
NOTE: The touchscreen is not supported on the environmental model.
□
1. Cut the hook tape into three pieces, one slightly longer
than the top edge of the touchscreen and two the length of the
side edges.
□
2. Apply the long piece of the hook tape to the inside face of
the touchscreen, aligning the inner edge of the hook tape with
the inner edge of the touchscreen border.
□
3. Apply the shorter pieces along the inside side edges of the
touchscreen, butting one end of each against the edge of the
long piece, and align them with the inner edge of the touch-
screen border.
□
4. Trim off the excess hook tape.
□
5. Cut the loop tape into three pieces, one slightly longer than
the top edge of the monitor face, and two the length of the side
edges.
10 min.
Number Qty Description
1948026?3 1 Touchscreen, 19-in.
1948644?5 1 Extension cable for upper monitor
R9010-0040 22.4 cm (8.8 in.) Tape, nylon hook
R9010-0045 11.2 cm (4.4 in.) Tape, nylon loop
R9090-0020 A/R Tape, vinyl