Baileigh TS-1044H, Operator'S Manual

Page: 41 / 68

38
38
Combination Blade Features

Designed to cut both with and across grain

40-50 teeth

Alternate top bevel and flat, or alternate top bevel
and raker tooth profile

Teeth are arranged in groups

Gullets are small and shallow (similar to a cross-cut
blade), then large and deep (similar to a ripping
blade
Laminate Blade Features

Best for cutting plywood or veneer

40-80 teeth

Triple chip tooth profile

Very shallow gullet
Thin Kerf Blade
A blade with thinner kerf than a standard blade. Since the spreader/riving knife included with this
table saw is sized for standard blades, thin kerf blades cannot be used on this saw unless they
meet the Blade Requirements specified in this manual; otherwise, they will increase the risk of
kickback.
DADO BLADES
Stacked Dado Blade
Multiple blades are stacked together to control the
cutting width. Stacked dado blades are more expensive
than wobble blades, but typically produce higher quality
results.
Wobble Dado Blade
A single blade mounted at a slight angle on an arbor hub. The blade angle is adjustable on the
hub, and the width of the dado cut is controlled by the angle setting of the blade.