15
15
Low voltage. Although the motor is designed for operation on the voltage and frequency
specified on the motor, normal loads will be handled safely on voltage no more than ten
percent above or below that figure. Heavy loads, however, require that voltage at motor
terminals equal the voltage specified on the motor.
Note:
Always check the connections, the load and the supply circuit whenever the
motor fails to perform satisfactorily.
The table saw is equipped with a push-button switch
that will accept a safety padlock (not included). To
safeguard your machine from unauthorized operation
and accidental starting by young children, the use of a
padlock is required.
TRANSPORTING AND LIFTING
While transporting or handling the machine, be careful and let the
activity be done by qualified personnel especially trained for this
kind of activity!
While the machine is being loaded or unloaded, make sure that no
person or object gets crushed by the machine!
Select proper transportation device according to the weight of the machine.
Make sure the lifting capacity of transportation device is competent for the weight of the
machine.
CAUTION:
Lifting and carrying operations should be carried out by skilled
workers, such as a truck operator, crane operator, etc. If a crane is used to lift the
machine, attach the lifting chain carefully, making sure the machine is well balanced.
Choose a location that will keep the machine free from vibration and dust from other
machinery. Keep in mind that having a large clearance area around the machine is
important for safe and efficient working conditions.
Summary of Contents for TS-1044H
Page 58: ...55 55 TABLE SAW PARTS DIAGRAMS...
Page 59: ...56 56...
Page 60: ...57 57...
Page 61: ...58 58...
