Baileigh DP-1250VS, Operator'S Manual

Page: 20 / 56

17
17
A Motor Provides power to the chuck
B 2-Speed Hi-Lo
Changes spindle speed RPM. DO NOT change spindle
RPM until the spindle has stopped completely
C Electrical Enclosure Houses the electrical components
D Control Panel Houses the
operator’s controls
E Down-Feed Handle Used by the operator to move the quill down and up.
F Column Supports the table and head
G Gear Rack Engages the table for height adjustment
H Handle Table height adjustment at two locations
I Coolant Pump Pumps coolant up to the chuck
J Base Support for drill press and coolant reservoir
K Worktable Lock Secures table when pivoting on column
L Worktable Adjustable table with T-slots
M Chuck Holds various tooling for drilling and tapping
N Safety Guard Adjustable guard with limit switch shut-off
O Work Light Provides adequate lighting for work area
P Depth Scale Lock Locks the position of the depth scale
Q Coolant Shut-Off Valve Controls volume of coolant
R Depth Scale Use for setting the depth in manual mode
S Main Power Disconnect Turns main power ON-OFF to the drill press
T Oil Level Gauge Shows current level of gear oil
S
X
T
U
V
W