![Baileigh CS-250EU Operator'S Manual Download Page 24](http://html.mh-extra.com/html/baileigh/cs-250eu/cs-250eu_operators-manual_466925024.webp)
21
21
10. Route the switch cord from the handle over the top
of the motor to the motor connector box.
11. Locate the socket (G) at the back of the box and
plug the connector into the socket and tighten the
collar (hand tight) to secure in place.
12. Attach the front splash guard and infeed support
roller to the base using the capscrews and
washers shipped in the mounting holes.
13. Remove and retain the M10x25 capscrews and
washers from the left side of the saw base.
14. Position the support roller (H) up to the machine
base and align the 2 slots with the screw holes in
the base.
15. Using (2) M10 washers and (2) M10x25 socket
head cap screws, attach the support roller to the
base until the cap screws are snug only. (Do not
tighten).
16. Place a level across the vise table and the top of
the roller. Raise or lower the support roller until it
is level.
17. Hold the support roller in position and tightening
cap screws to secure the support roller.
18. Loosen the cap screws and washers at the front of
the saw base.
19. Slide the splash guard slots (I) down onto the cap screws and behind the washers.
20. When fully seated, tighten the cap screws.
21. Attach the material stop to the right side of the vise
by inserting the threaded end of the long rod into
the side of the vise.
22. Turn clockwise (
cw
) until snug making sure
graduated scale can be easily read.
23. Using a wrench, tighten the hex jam nut (J) to hold
the rod in position for operation.
24. Loosen the jam nut and rotate the stop out of the
way and tighten the jam nut again when the stop is
not needed.
G
H
I
J
Summary of Contents for CS-250EU
