20
20
4. Remove the strap or cord used to hold the head
in the lowered position and allow the head to raise
to the up position.
5. Remove the oil fill transport plug from gear
transfer case. Use a wrench to unscrew an
M20x40 hex screw from the oil fill hole (C).
6. Attach the feed handle to the head assembly by
inserting the threaded end of the feed handle (D)
into the gear oil fill hole.
7. Turn the handle clockwise (
cw
) until snug tight.
8. Turn the handle back until the trigger switch (E)
points up.
9. Hold the handle in position and tighten jam nut (F)
clockwise (
cw
) to lock the handle in position.
C
D
F
E
Summary of Contents for CS-250EU
