Baileigh CS-250EU, Operator'S Manual

Page: 22 / 60

19
19
ASSEMBLY AND SET UP
Prepare the machine for hoisting
1. Using a sling (A), carefully wrap it around the collar of the
moveable jaw and motor mount.
Place the machine on the top of the stand.
2. Using an overhead hoist, lift the machine unit, align
and insert the four socket head cap screws M8 x 35
(B) through the saw base, rubber washers and into
the threaded inserts in the stand top, while lowering
into position.
NOTE: Insert and start the threads in all
four capscrews before fully lowering the saw onto the
stand.
3. Once the capscrews have been started, saw is
Secure the machine onto the stand using nuts on
the underside of the stand holes.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
A
B