Baileigh Industrial PT-105HD, Operator'S Manual, Page: 41 / 48

39
39
LUBRICATION AND MAINTENANCE
Note: Proper maintenance can increase the life expectancy of your machine.
Daily Maintenance
•
Check daily for any unsafe conditions and fix immediately.
•
Check that all nuts and bolts are properly tightened.
•
On a weekly basis clean the machine and the area around it.
•
Lubricate threaded components and sliding devices.
•
Apply rust inhibitive lubricant to all non-painted surfaces.
•
Do a general cleaning by removing dust, metal powder, and metal scrap from the table.
•
Inspect the torch consumables for wear, and clean or replace as necessary.
•
Check that the control console circulating fans are working and the emergency stop button is
in good working order.
Weekly Maintenance
•
Thoroughly clean the machine.
•
Check any exposed electrical wiring for wear or damage.
•
Inspect the power unit ground clamp for wear or damage.
Monthly Maintenance
•
Tighten any loose bolts, nuts, or screws on the machine.
•
Re-
grease the gear racks for the “X” & “Y” axes.
•
Re-grease the slide bearings that have fittings.
•
Inspect the timing belts for wear (every 6-12 months).
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.