Baileigh Industrial PT-105HD, Operator'S Manual, Page: 12 / 48

10
10
TECHNICAL SPECIFICATIONS
Table Dimensions (W x L x H) 102.25
” x 177.5" x 58.75” (2597 x 4508 x 1492mm)
Cutting Area (X x Y) 60
” x 122” (1540 x 3100mm)
Table Height
34.25” (870mm)
Travel Speed 315ipm (8000mmpm)
Table Load Capacity 1" Mild Steel
Capacity Depends on Plasma System Chosen
Drive Stepper Motor
Power 220V, 1ph, 60hz, 8A*
Exhaust Fan Motor** 220V / 1ph / 60hz
Exhaust Fan Motor** 1300cfm (36.8m
3
/m)
Water Table Capacity** Approximately 100gal (380L)
Shipping Weight 1400lbs. (635kg)
Shipping Dimensions (W x L x H) 90" x 111" x 69" (1829 x 1829 x 1524 x 1752mm)
* Does not include plasma cutter.
** Table will be either draft or water. Not both.
•
Singl
e “X” Axis and Dual “Y” Axis Stepper Motors
•
“Z” Axis motor to manually adjust torch height
•
Roller trays to retrieve parts and drop off
•
Tube Axial Exhaust Fan (1340cfm maximum as is on table)
•
A license to download BobCAD-CAM Express V30 Software
•
File Transfers via USB Interface (USB 2.0 compatible)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.