Baileigh Industrial PH-28A, Operator'S Manual

Page: 10 / 28

8
8
TECHNICAL SPECIFICATIONS
Control Power Pnumatic, 80 – 120psi
Air Consumption 15CFM
Blows per Minute 0 – 1000
Tooling Height Adjustment 1.5" (38.1mm)
Capacity
Mild Steel
Aluminum
16ga., 0.059” (1.51mm)
14ga., 0.064” (1.62mm)
Throat Depth 28” (711mm)
Included Tooling
2.5” Thumbnail Shrinking Dies,
2.5” Master Flat Top Die,
1” Linear Stretch Die,
Ø
2.5” x 36” Radius Die,
Ø
2.5” x 24” Radius Die,
Ø
2.5” x 12” Radius Die,
Weight 1000 lbs (454kg)
Shiping Dimensions 36” x 48” x 70” (915 x 1219 x 1778mm)
Based on a material tensile strength of *60000 PSI – mild steel
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.