Baileigh Industrial IDX-10, Operator'S Manual

Page: 13 / 40

11
11
INDEX TABLE ATTACHMENT (OPTIONAL EQUIPMENT)
Introduction
The IDX-10, 15, or 20 Indexing table is designed to allow you too accurately and repeatedly
position distances between bends, by using the adjustable stops. Additionally, the Index table
can be used to hold the material being bent perfectly level while bending, or altering the angles
between bends.
Connection to Your Machine
Use the parts drawings near the end of the manual as an additional assembly reference.
1. Mount the hanger bracket to the bender
plate.
2. Assembly the short dogleg bracket
assembly onto the slide shaft and into the
main tube.
RDB-250 Shown. Other Models Similar.