Baileigh Industrial DP-1375VS-110, Operator'S Manual

Page: 20 / 48

18
18
A Table Elevation Shaft Table height adjustment at two locations
B Handle
Moveable crank handle to turn elevation shafts and table
lock shafts.
C Worktable Lock Shaft Secures table when pivoting on column
D Safety Guard Adjustable guard with limit switch shut-off
E Chuck Holds various tooling for drilling and tapping
F Depth Stop Adjustment
When unlocked, this will adjust to set the depth stop
position.
G Depth Stop Lock Locks the position of the depth stop
H Work Light Provides adequate lighting for work area
I Depth Scale Use for setting the depth stop approximate dimension
J Control Panel Houses the
operator’s controls
K Motor Provides power to the chuck
L Electrical Enclosure Houses the electrical components
M Down-Feed Handle Used by the operator to move the quill down and up.
N Coolant Shut-Off Valve Controls volume of coolant
O Column Supports the table and head
P Worktable
The sturdy worktable can be positioned at varying heights
and rotated 180° in either direction. It has T-slots to allow
the use of 1/2” or M14 bolts. Below the worktable are three
crankshafts. The two crankshafts (A) control the up /down
motion of the table. Always unlock the table with crankshaft
(C) before changing the height or rotating it. Then lock the
T
U
V
W