9
9
4.0 Specifications
Model number
BWS-10
Stock number
1231864
Motor and Electricals
Motor
Brushed DC, 120V, 1.8A
Power source required
120V AC, single phase, 60Hz
On/off switch
Rocker style, waterproof
Power cable size
18AWG x 3C SJTW, 6 ft. (182 cm)
Power plug installed
5-15P, 15A, 125V
Recommended minimum circuit size
1
10A
Noise emission
2
Acoustic power, idling
74.0 dB(A)
Acoustic pressure, idling
68.7 dB(A)
Wheels
Stone Wheel size (dia. x width x bore)
10 x 2 x 1/2 in. (250 x 50 x 12 mm)
Stone wheel material
Single alundum
Stone wheel grit
220
Wheel speed, no load
Variable, 90-150 rpm
Honing wheel size (dia. x width)
9 x 1-3/16 in. (230 x 30 mm)
Honing wheel material
ABS+, leather tire
Main materials
Arbor
SUS-304 Steel
Housing
Steel
Knobs and Handle
ABS Polymide
Dimensions
Base mounting holes, centers, (W x D)
10 x 7-7/8in (255 x 200 mm)
Footprint (W x D)
12 x 10.15 in. (305 x 258 mm)
Overall dimensions (L x W x H)
16 x 12 x 13 in. (400 x 300 x 330 mm)
Shipping dimensions (L x W x H)
19-1/2 x 15 x 17 in. (495.3 x 381 x 431.8 mm)
Weights
Net weight
22.5 lb (10.2 kg)
Shipping weight
23.5 lb (10.7 kg)
Table 1
1
subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace conditions
vary, this information is intended to allow the user to make a better estimation of the hazards and risks involved only.
L = length, W = width, H = height, D = depth
The specifications in this manual were current at time of publication, but because of our policy of continuous improvement,
Baileigh Industrial reserves the right to change specifications at any time and without prior notice, without incurring obligations.
