17
17
10.4 Cleaning
Metal shavings may still be hot
from recent grinding operations. Make sure
shavings and debris are cold before cleaning the
grinder.
Brush all shavings from the motor housing and support
arm. Check grinding wheel for cracks and chips.
Replace if damaged.
Frequently empty and refill the water tank. Clean out
any shavings or sludge from the bottom.
Avoid use of the following
cleaning chemicals or solvents: gasoline, carbon
tetrachloride, chlorinated solvents, ammonia, and
household detergents containing ammonia.
10.5 Lubrication
All motor bearings are permanently lubricated and
sealed at the factory and require no additional
lubrication.
10.6 Additional servicing
Any other servicing should be performed by an
authorized service representative.