6
6
31. Do not use this vise for other than its intended use.
32. Replace warning labels if they become obscured or removed.
33. Always inspect vise before use. Check for misalignment of moving parts, binding of moving parts, breakage of
parts, mounting and any other conditions that may affect the tool’s operation. If damage is found, repair the vise
immediately or replace it.
34. Have tool serviced only by qualified personnel, using authorized replacement parts.
35. Provide for adequate space surrounding work area and sufficient lighting.
36. Do not use this tool while tired or under the influence of drugs, alcohol or medication.
37. Give your work undivided attention. Looking around, c
arrying on a conversation and “horse-play” are careless
acts that can result in serious injury.
38. Maintain a balanced stance at all times. Do not overreach while performing the work.
WARNING:
Always wear eye and face protection when striking vise-held objects or when
using power tools with the vise.
Read carefully and follow all safety rules and operating instructions before first use of this product.
SPECIFICATIONS
Required Hitch Receiver
2
” Square
Jaw Width
5.9” (150mm)
Maximum Jaw Opening
5.5
” (140mm)
Throat Depth
5” (127mm)
Pipe Jaw Capacity
.5” to 3.5” (12.7 to 88.9mm)
Jaw Travel Per One Rotation of Handle
0.157” (4mm)
Clamping Force
5620lbf/7868lbf (25/35KN)
Jaw Insert Hardness
45-56 HRC
Weight, Net
27.55lbs (12.5kgs)
Carton Dimensions
20.87" x 8.27" x 10.24" (530 x 210 x 260mm
Primary Materials
Steel and Ductile Iron
Paint Finish
Powder Coat Enamel
DESCRIPTION
•
6” Hitch / Bench Vise with Pipe Jaws has a cast iron body and replaceable hardened steel jaws.
•
The vise features parallel jaws and pipe jaws.
•
Vise will
mount into a 2” receiver or mount to a work bench.
•
Anvil on the body of vise provides a convenient wide work surface.
•
Adjustment screws allow the mounting shaft to be fit snug into the receiver.
