background image

 

 

THANK YOU & WARRANTY 

Thank you for your purchase of a machine from Baileigh Industrial Holdings LLC. We hope that 

you find it productive and useful to you for a long time to come. 

 

Inspection & Acceptance.

  Buyer shall inspect all Goods within ten (10) days after receipt thereof. Buyer’s 

payment shall constitute final acceptance of the Goods and shall act as a waiver of the Buyer’s rights to inspect or 

reject the goods unless otherwise agreed. If Buyer rejects any merchandise, Buyer must first obtain a Returned 

Goods Authorization (“RGA”) number before returning any goods to Seller. Goods returned without an RGA will be 

refused. Seller will not be responsible for any freight costs, damages to goods, or any other costs or liabilities 

pertaining to goods returned without a RGA. Seller shall have the right to substitute a conforming tender. Buyer will 

be responsible for all freight costs to and from Buyer and repackaging costs, if any, if Buyer refuses to accept 

shipment. If Goods are returned in unsalable condition, Buyer shall be responsible for full value of the Goods. 

Buyer may not return any special-order Goods. Any Goods returned hereunder shall be subject to a restocking fee 

equal to 30% of the invoice price. 

 

Specifications.

 Seller may, at its option, make changes in the designs, specifications or components of the Goods 

to improve the safety of such Goods, or if in Seller’s judgment, such changes will be beneficial to their operation or 

use. Buyer may not make any changes in the specifications for the Goods unless Seller approves of such changes 

in writing, in which event Seller may impose additional charges to implement such changes. 

 

Limited Warranty.

  Seller warrants to the original end-user that the Goods manufactured or provided by Seller 

under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from 

the  date of purchase, provided that the Goods are installed, used, and maintained in accordance with any 

instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The 

original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of 

the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to 

Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without 

a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods 

to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective 

Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for 

replacement or return after a period of 10 days from date of receipt. The foregoing warranty is Seller’s sole 

obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty 

does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or 

replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, 

abuse, neglect, or accidents, (f) defects or damage to the Goods resulting from improper or unauthorized 

alterations, modifications, or changes; and (f) any Goods that has not been installed and/or maintained in 

accordance with the instruction manual or technical guidelines provided by Seller. 

 

EXCLUSION OF OTHER WARRANTIES.

 THE FOREGOING LIMITED WARRANTY IS IN LIEU OF ALL OTHER 

WARRANTIES, EXPRESS OR IMPLIED. ANY AND ALL OTHER EXPRESS, STATUTORY OR IMPLIED 

WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS 

FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. NO WARRANTY IS MADE WHICH 

EXTENDS BEYOND THAT WHICH IS EXPRESSLY CONTAINED HEREIN. 

 

Limitation of Liability.

 IN NO EVENT SHALL SELLER BE LIABLE TO BUYER OR ANY OTHER PARTY FOR 

ANY INCIDENTIAL, CONSEQUENTIAL OR SPECIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, LOST 

PROFITS OR DOWN TIME) ARISING FROM OR IN MANNER CONNECTED WITH THE GOODS, ANY BREACH 

BY SELLER OR ITS  AGENTS OF THIS AGREEMENT, OR ANY OTHER CAUSE WHATSOEVER, WHETHER 

BASED ON CONTRACT, TORT OR ANY OTHER THEORY OF LIABILITY. BUYER’S REMEDY WITH RESPECT 

TO ANY CLAIM ARISING UNDER THIS AGREEMENT IS STRICTLY LIMITED TO NO MORE THAN THE 

AMOUNT PAID BY THE BUYER FOR THE GOODS. 

 

 

 

 

Summary of Contents for BR-18M-24

























Reviews: