Baileigh Industrial BB-9616M, Operator'S Manual

Page: 14 / 40

12
12
TRANSPORTING AND LIFTING
IMPORTANT: Lifting and carrying operations should be carried out by skilled workers,
such as a truck operator, crane operator, etc. If a crane is used to lift the machine, attach the
lifting chain carefully, making sure the machine is well balanced.
Follow these guidelines when lifting with truck or trolley:

The lift truck must be able to lift at least 1.5
– 2
times the machines gross weight.

Make sure the machine is balanced. While
transporting, avoid rough or jerky motion, and
maintain a safe clearance zone around the
transport area.

Use a fork lift with sufficient lifting capacity and
forks that are long enough to reach the
complete width of the machine.

Remove the securing bolts that attach the machine to the pallet.

Approaching the machine from the side, lift the machine on the frame taking care that there
are no cables or pipes in the area of the forks.

Move the machine to the required position and lower gently to the floor.

Level the machine so that all the supporting feet are taking the weight of the machine and no
rocking is taking place.
Follow these guidelines when lifting crane or hoist:

Always lift and carry the machine with the lifting holes provided at the top of the machine.

Use lift equipment such as straps, chains, capable of lifting 1.5 to 2 times the weight of the
machine.

Take proper precautions for handling and lifting.

Check if the load is properly balanced by lifting it an inch or two.

Lift the machine, avoiding sudden accelerations or quick changes of direction.

Locate the machine where it is to be installed, and lower slowly until it touches the floor.